Gulfstream G450 exterior

Home · Aircraft · Gulfstream G450

Gulfstream G450 charter

US-Europe capable; strong charter supply. Typical charter rate $7,000–$9,000 per flight hour. We quote a trip-specific total quote before you commit.

12Passengers
4,350 nmRange
476 ktCruise
$7,000+Per hour

Specifications

Gulfstream G450 numbers that matter

Published manufacturer and type figures. Charter-relevant first — seats, range, baggage.

Passengers

12up to 16 in a high-density layout

Range

4,350 nm5,006 statute miles

Cruise speed

476 kt548 mph

Service ceiling

45,000 ftabove most weather and airline traffic

Cabin height

6.2 ftstanding room

Cabin length

40.3 ft7.3 ft wide

Baggage

169 cu ftusable hold volume

In service since

2005Gulfstream

Hourly figures are US charter-market estimates for comparison, not quotes. Actual pricing depends on operator, date, positioning and airport fees.

Cabin geometry

Gulfstream G450 inside the dimensions

Compare the usable cabin shape, not only the passenger count. These drawings use the same audited aircraft-comparison data as our comparison tool.

Model cabin planRepresentative configuration
Gulfstream G450 representative cabin plan
True-scale cross-sectionCabin width and height
Gulfstream G450 true-scale cabin cross-section

Representative model layout for comparison. The actual aircraft, seating plan, galley, lavatory and furnishings vary by tail and operator; TriStar confirms the offered aircraft before booking.

Where it can actually go

Runway reality for the Gulfstream G450

Published runway figures are planning context only. Suitability depends on the actual aircraft, payload, weather, field elevation and operating conditions, so the proposed airport is checked for the requested trip.

Runway needed

~6,000 fttypical balanced field, mid weight

Airport fit

Trip-specificconfirmed for the proposed aircraft and conditions

Range from New York

4,350 nmLondon nonstop
  • London — 3,000 nm — nonstop
  • Miami — 950 nm — nonstop
  • Los Angeles — 2,150 nm — nonstop

Runway requirement is typical for the class, not a manufacturer limit — temperature, elevation and payload move it, and dispatch checks the actual field for your date.

Good to know

Gulfstream G450 charter questions

How much does it cost to charter a Gulfstream G450?

Typical US charter rates run $7,000–$9,000 per flight hour, so a two-hour leg lands around $14,000–$18,000 before positioning. These are market estimates, not quotes — the trip-specific total depends on your dates, positioning and airport fees, and dispatch sends it after current availability is checked.

How many passengers does the Gulfstream G450 carry?

12 in the normal charter layout and up to 16 in a high-density configuration. Baggage is the usual real constraint: 169 cubic feet, roughly 42 large cases with soft bags on top.

How far can the Gulfstream G450 fly?

4,350 nautical miles (5,006 statute miles) at a 476 kt cruise. Real range drops with headwind, full seats and hot high airports, so we plan the fuel stop rather than discover it.

Which airports can the Gulfstream G450 use?

As a heavy jet it typically needs about 6,000 ft of runway at mid weights. Runway suitability depends on the actual aircraft, payload, weather and field conditions, so dispatch checks the proposed airport for the requested date.

Price a Gulfstream G450 on your route

Tell dispatch where and when. Real availability and one trip-specific total, after current availability is checked.